On power system automation: a Digital Twin-centric framework for the next generation of energy management systems

The ubiquitous digital transformation also influences power system operation. Emerging real-time applications in information (IT) and operational technology (OT) provide new opportunities to address the increasingly demanding power system operation imposed by the progressing energy transition. This IT/OT convergence is epitomised by the novel Digital Twin (DT) concept. By integrating sensor data into analytical models and aligning the model states with the observed system, a power system DT can be created. As a result, a validated high-fidelity model is derived, which can be applied within the next generation of energy management systems (EMS) to support power system operation. By providing a consistent and maintainable data model, the modular DT-centric EMS proposed in this work addresses several key requirements of modern EMS architectures. It increases the situation awareness in the control room, enables the implementation of model maintenance routines, and facilitates automation approaches, while raising the confidence into operational decisions deduced from the validated model. This gain in trust contributes to the digital transformation and enables a higher degree of power system automation. By considering operational planning and power system operation processes, a direct link to practice is ensured. The feasibility of the concept is examined by numerical case studies.The electrical power system is in the process of an extensive transformation. Driven by the energy transition towards renewable energy resources, many conventional power plants in Germany have already been decommissioned or will be decommissioned within the next decade. Among other things, these changes lead to an increased utilisation of power transmission equipment, and an increasing number of complex dynamic phenomena. The resulting system operation closer to physical boundaries leads to an increased susceptibility to disturbances, and to a reduced time span to react to critical contingencies and perturbations. In consequence, the task to operate the power system will become increasingly demanding. As some reactions to disturbances may be required within timeframes that exceed human capabilities, these developments are intrinsic drivers to enable a higher degree of automation in power system operation. This thesis proposes a framework to create a modular Digital Twin-centric energy management system. It enables the provision of validated and trustworthy models built from knowledge about the power system derived from physical laws, and process data. As the interaction of information and operational technologies is combined in the concept of the Digital Twin, it can serve as a framework for future energy management systems including novel applications for power system monitoring and control, which consider power system dynamics. To provide a validated high-fidelity dynamic power system model, time-synchronised phasor measurements of high-resolution are applied for validation and parameter estimation. This increases the trust into the underlying power system model as well as the confidence into operational decisions derived from advanced analytic applications such as online dynamic security assessment. By providing an appropriate, consistent, and maintainable data model, the framework addresses several key requirements of modern energy management system architectures, while enabling the implementation of advanced automation routines and control approaches. Future energy management systems can provide an increased observability based on the proposed architecture, whereby the situational awareness of human operators in the control room can be improved. In further development stages, cognitive systems can be applied that are able to learn from the data provided, e.g., machine learning based analytical functions. Thus, the framework enables a higher degree of power system automation, as well as the deployment of assistance and decision support functions for power system operation pointing towards a higher degree of automation in power system operation. The framework represents a contribution to the digital transformation of power system operation and facilitates a successful energy transition. The feasibility of the concept is examined by case studies in form of numerical simulations to provide a proof of concept.Das elektrische Energiesystem befindet sich in einem umfangreichen Transformations-prozess. Durch die voranschreitende Energiewende und den zunehmenden Einsatz erneuerbarer Energieträger sind in Deutschland viele konventionelle Kraftwerke bereits stillgelegt worden oder werden in den nächsten Jahren stillgelegt. Diese Veränderungen führen unter anderem zu einer erhöhten Betriebsmittelauslastung sowie zu einer verringerten Systemträgheit und somit zu einer zunehmenden Anzahl komplexer dynamischer Phänomene im elektrischen Energiesystem. Der Betrieb des Systems näher an den physikalischen Grenzen führt des Weiteren zu einer erhöhten Störanfälligkeit und zu einer verkürzten Zeitspanne, um auf kritische Ereignisse und Störungen zu reagieren. Infolgedessen wird die Aufgabe, das Stromnetz zu betreiben anspruchsvoller. Insbesondere dort wo Reaktionszeiten erforderlich sind, welche die menschlichen Fähigkeiten übersteigen sind die zuvor genannten Veränderungen intrinsische Treiber hin zu einem höheren Automatisierungsgrad in der Netzbetriebs- und Systemführung. Aufkommende Echtzeitanwendungen in den Informations- und Betriebstechnologien und eine zunehmende Menge an hochauflösenden Sensordaten ermöglichen neue Ansätze für den Entwurf und den Betrieb von cyber-physikalischen Systemen. Ein vielversprechender Ansatz, der in jüngster Zeit in diesem Zusammenhang diskutiert wurde, ist das Konzept des so genannten Digitalen Zwillings. Da das Zusammenspiel von Informations- und Betriebstechnologien im Konzept des Digitalen Zwillings vereint wird, kann es als Grundlage für eine zukünftige Leitsystemarchitektur und neuartige Anwendungen der Leittechnik herangezogen werden. In der vorliegenden Arbeit wird ein Framework entwickelt, welches einen Digitalen Zwilling in einer neuartigen modularen Leitsystemarchitektur für die Aufgabe der Überwachung und Steuerung zukünftiger Energiesysteme zweckdienlich einsetzbar macht. In Ergänzung zu den bereits vorhandenen Funktionen moderner Netzführungssysteme unterstützt das Konzept die Abbildung der Netzdynamik auf Basis eines dynamischen Netzmodells. Um eine realitätsgetreue Abbildung der Netzdynamik zu ermöglichen, werden zeitsynchrone Raumzeigermessungen für die Modellvalidierung und Modellparameterschätzung herangezogen. Dies erhöht die Aussagekraft von Sicherheitsanalysen, sowie das Vertrauen in die Modelle mit denen operative Entscheidungen generiert werden. Durch die Bereitstellung eines validierten, konsistenten und wartbaren Datenmodells auf der Grundlage von physikalischen Gesetzmäßigkeiten und während des Betriebs gewonnener Prozessdaten, adressiert der vorgestellte Architekturentwurf mehrere Schlüsselan-forderungen an moderne Netzleitsysteme. So ermöglicht das Framework einen höheren Automatisierungsgrad des Stromnetzbetriebs sowie den Einsatz von Entscheidungs-unterstützungsfunktionen bis hin zu vertrauenswürdigen Assistenzsystemen auf Basis kognitiver Systeme. Diese Funktionen können die Betriebssicherheit erhöhen und stellen einen wichtigen Beitrag zur Umsetzung der digitalen Transformation des Stromnetzbetriebs, sowie zur erfolgreichen Umsetzung der Energiewende dar. Das vorgestellte Konzept wird auf der Grundlage numerischer Simulationen untersucht, wobei die grundsätzliche Machbarkeit anhand von Fallstudien nachgewiesen wird

A novel framework for synchrophasor based online recognition and efficient post-mortem analysis of disturbances in power systems

Synchrophasor based applications become more and more popular in today’s control centers to monitor and control transient system events. This can ensure secure system operation when dealing with bidirectional power flows, diminishing reserves and an increased number of active grid components. Today’s synchrophasor applications provide a lot of additional information about the dynamic system behavior but without significant improvement of the system operation due to the lack of interpretable and condensed results as well as missing integration into existing decision-making processes. This study presents a holistic framework for novel machine learning based applications analyzing both historical as well as online synchrophasor data streams. Different methods from dimension reduction, anomaly detection as well as time series classification are used to automatically detect disturbances combined with a web-based online visualization tool. This enables automated decision-making processes in control centers to mitigate critical system states and to ensure secure system operations (e.g., by activating curate actions). Measurement and simulation-based results are presented to evaluate the proposed synchrophasor application modules for different use cases at the transmission and distribution level

Machine learning and digital twins: monitoring and control for dynamic security in power systems

The reader of the chapter will be able to connect techniques from machine learning (ML) and digital twins (DTs) to gain insights for monitoring and control of (dynamic) security for electrical power systems. DTs are validated and verified high-fidelity (hf) models providing high simulation accuracy. DTs can be used for simulation of the supervised process of system operation and are therefore able to provide synthetic studied data, where measurement data are scarce. However, for some real-time applications in monitoring and control, such high-fidelity simulation models are not appropriate due to the corresponding computational barrier. There, ML aims to create an application-specific, low-fidelity (lf) approximation of the digital twin. Such trained lf models are used in real-time applications where computational time is scarce and lf information is sufficient. The conceptual intersection of hf and lf models has been little explored and becomes increasingly complex. This chapter aims to provide a conceptual overview of how such hf and lf models can be combined. This chapter is split into two parts where the first part is to introduce ML, lf models, and digital twins, hf models, for power systems analysis, and the second chapter is to use these two types of models to form purpose-driven surrogate lf models, illustrated on the example of dynamic security assessment (DSA). In the first part, the concepts for using DTs as hf models for online power system studies and their corresponding tuning of model parameters are introduced. Subsequently, ML i.e., lf models, are introduced and their corresponding training frameworks. Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Intelligent Electrical Power Grid

PMU-based online and offline applications for modern power system control centers in hybrid AC-HVDC transmission systems

This investigation presents new control center applications for the management of hybrid AC-DC transmission systems incorporating phasor measurements. This is done by the identification and extraction of critical events from historical and online measurement records as well as dynamic simulation data using artificial intelligence methods. The new control center applications provide a web-based dynamic monitoring interface for the operator assistance

Challenges and opportunities for phasor data based event detection in transmission control centers under cyber security constraints

The scope of this survey is the phasor based event detection under cyber security constraints in modern transmission control centers. A general concept for a physical and cyber event detection is developed as a combination of state-of-the-art disturbance classification and cyber-attack detection methods. This requires the incorporation of heterogeneous data sources and advanced data fusion and analysis techniques. An enhanced and robust recognition of the current grid situation is proposed to distinguish between different scheduled and unscheduled grid events. Furthermore, Digital Twins are considered as new promising technology for control centers and potential benefits for physical and cyber event detection are described